Chloride process rutile dioaxide CR-985 (Photovoltaic film grade)

DESCRIPTION

CR985 is a kind of rutile titanium dioxide pigment, produced by advanced chloride process and treated with special inorganics, resulting in good whiteness, high hiding power, highly preventing blue stain, dedicated to use in photovoltaic.

SAFETY AND HEALTH PRECAUSIONS

This product is non-toxic. If inhaled, move to fresh air immediately. If eye contacted, rinse thoroughly with plenty of water; call a physician if necessary. Avoid food touch.

KEY FEATURES

• Good whiteness
• High hiding power
• Strongly preventing blue stain
• Strong peel strength

RECOMMENDED APPLICATIONS

♦Photovoltaic film.

PACKAGING

The product is packed in paper bags of three quality paper layers with a layer of plastic lining, 25 kg in net per bag. Jumbo bag of 500 kg or 1000 kg is available as per customer’s option.

TYPICAL PROPERTIES

STORAGE AND TRANSPORTION

The products should be stored in a ventilated and dry place as classified with the same batch number to avoid mixing or pollution. Do not store them directly on the ground. Pallets or plastic sheets shall be used to keep the products protected from moisture. It is prohibited to contact or mixed with substance that may react with the product. Handle with care when transport, loading and unloading. Keep out of direct sunlight and rain.

INFORMATION PROVIDED HEREIN ABOVE DOES NOT CONSTITUTE ANY LEGALLY BINDING OBLIGATIONS ON SHANGHAI LIANGJIANG. IT IS PROVIDED FOR GUIDANCE ONLY. IT IS STRONGLY SUGGESTED THAT CUSTOMERS TO PERFORM A FULL INSPECTION OF THE PRODUCTS OR SAMPLES UP RECEPTION. NO WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, SHALL BE CONSTRUDED WITH THIS DOCUMENT.THE DATA SETS HERE ABOVE ARE SUBJECT TO REGULATORY OR INREGULATORY UPDATING.